AVS Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
279 Posts
Discussion Starter · #1 ·
I pretty sure I am on the way to having the pj setup after the new tubes.


Is there anoughter way to set eletronic focus? While looking at the blue crt I have to turn the fucus pot all the way clock wise to have good eletronic focus. I would like for it to be in the middle.


I have setup the red and green and they work nice, only stuck on the blue.


I have acouple of the service manuals and setup sheets but doesn't say anything about it.



Thanks agian

Brian
 

·
Registered
Joined
·
18,503 Posts
Try swapping the focus leads between tubes at the bottom of that focus block. That will let you know if it's a bad block or a bad socket/blue tube.


Curt
 

·
Registered
Joined
·
279 Posts
Discussion Starter · #3 ·
Good idea I'll try that, I even have anoughter focus block from a 1251q pj. For some reason I thought that I read some were that there are focusing magnets on the tube.(Not the agist ones) I still get good focus out of the blue but like I said the pot is cranked all the way.


Thanks for the input

Brian
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top