[nidi]

Hello guys,



how many of you out there are using Frankenyokes righ now?



which ones do you use ? 1292 or G90 , ....



any focus boards that blew up since installaion ?



and finally , how many hours do you watch per day/week ?




I finally will get mine fitted next week on m Marquee 9500 Ultra and would


like to kow your experiences, good and bad



Thanks


Michael

 

[1031]

how many of you out there are using Frankenyokes righ now?


I have frankenyokes

which ones do you use ? 1292 or G90


1292


any focus boards that blew up since installaion ?


Nope, but focusmodule runs bit hotter because those 1292 yokes has little lower magnetig strenght, so that static focus needs to be at near 20 to get best focus.


and finally , how many hours do you watch per day/week ?

depends, but between 8-15 hours/week



I finally will get mine fitted next week on m Marquee 9500 Ultra and would


like to kow your experiences, good and bad


+


You will be suprised how much less work you have to do to get stig settings right (less work with 2/4-poles) And you will got much more usable contrast range out of Marquee.


-


Raster centering would be little different/difficult to get right. Least on my case i found that rotating yoke did move raster, but i didnt get it to "perfect center" so i made extra centering magnets from 2-poles (more details at Curt´s forum..) Many others have found no problems with raster centering..


-Jarmo

 

[Gino AUS]

I've been using 3 sets of 1292 yokes in each of my 9500's, wouldn't use a marquee without them, no problems whatsoever.

 

[nidi]



Quote:
Originally Posted by Gino AUS /forum/post/16940109


I've been using 3 sets of 1292 yokes in each of my 9500's, wouldn't use a marquee without them, no problems whatsoever.

Thanks Jarmo & Gino,


can't wait to have he G90 yokes installed in my Marquee Ultra.



Michael