AVS Forum banner
1 - 15 of 15 Posts

·
Premium Member
Joined
·
26,466 Posts
Discussion Starter · #1 ·
I have two tri-corner traps from realtraps in black. They are in terrific condition. They include the mounting hardware and necessary zip ties to mount them.

http://realtraps.com/tri-corner.htm

I will sell the pair for $200 plus actual shipping cost. I have the orginal packing material.

I have two of the ACS PlanarTrap acoustic panels. I have rearranged my room (actually took out a window), so I am clearing out some stuff.

Here's the product page for the acoustic treatment:

http://www.acousticsciences.com/products/planar-traps

I used the treatment at the first reflection pts on the side walls. See attached photos

Assembly and application guide:

http://www.asc-hifi.com/planar-trap-guide.htm

http://www.asc-hifi.com/planar-trap-technicals.htm

New they were $600 plus shipping. I will sell for $200 plus actual shipping cost for both panels. I think I still have the original boxes to ship the panels.

thanks for looking

Ron
 

Attachments

·
Premium Member
Joined
·
26,466 Posts
Discussion Starter · #10 · (Edited)
Could you provide me with its dimensions?

I'll let you know if it works and what I decide.

Thank you!
Here's the press release from realtraps (includes dimensions)

The RealTraps Tri-Corner is a triangle shaped bass trap, also four inches thick, that fits perfectly in tri-corners where two walls meet the ceiling or floor. Like the Corner MondoTrap, the new Tri-Corner appears only one inch thick when installed, to intrude visually as little as possible while still retaining very high performance. At 32 inches on each side, it has a surface area large enough to tame even very low bass frequencies. Price is $249.99 each.

The picture courtesy of realtraps will give you an idea of what they look like mounted in the corner ceiling position. They can be placed at floor level too
 

Attachments

1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top