AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter · #1 ·
Hi,


While I'm at it trying to fix my problem with the Blue tube, I'll try to do the G2 perfect. According to a Barco repair in Norway I should shotcut ABL on the neckboard, but there isn't anything to shortcut?


Is the BG1208s/2 G2 procedure just to enter the Service Menu, G2 Adjustment and tune the R, G, and B pot on the G2 board until the LED on the neckboards shuts off?


Thanks,
 

·
Registered
5.2.0 Sony VPL-VW95ES, AT Screen, DIY THX-650, B&W 601S2, Fi IB, Integra 3.4, Buckeye 4x, Crest 8200
Joined
·
1,412 Posts
You have the correct procedure for your machine. It is necessary to remove the ABL strap on the amp cards on older machines to do the G2 adjust.


-Mike
 

·
Registered
Joined
·
59 Posts
Discussion Starter · #3 ·
Thanks,


Yes I did use that procedure yesterday evening with great success on the G2. Too bad it did not help with the Blue tube, which I now are more certain than ever is BROKEN... 1100 hours? A real pity?:(
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top