Quote:
dont understand the question??????
are you talking about the conversion angle
once you do a factory reset everything is centred on green by moving the guns red,blue manually
Quote:
You have to be in the service mode to get to these settings
why would you need to get to timer anyway
page 111 You have to be in the service mode to get to these settings
Quote:
this has nothing to do with it
Quote:
I suppose you mean FLAPPING?????
you should check all and adjust if need
Really you should be taking your time and reading the manual and follow it step by step then when you have a problem ask your first question is in the first part of basic setup
| Originally Posted by xenon1nonex1 when the guns are reset back to factory the blue is way different from the other two. Its way out on bow and skew and higher. would it pay to readjust it manual on the tube neck ? |
are you talking about the conversion angle
once you do a factory reset everything is centred on green by moving the guns red,blue manually
Quote:
| Originally Posted by xenon1nonex1 Now reading the dealers installation book some things are not explained in full like on page 56 adjusting the timer , this just wont adjust no matter what i try pages 111-121 all these keys that are in the menu do not show on my unit anyone know why and how to get them operational , |
why would you need to get to timer anyway
page 111 You have to be in the service mode to get to these settings
Quote:
| Originally Posted by xenon1nonex1 I have the lates eproms sets. . |
Quote:
| Originally Posted by xenon1nonex1 page 66 flagging on red only the lower right hand side is slightly out adjusting will bring it back a lot better but then the other side goes out. So it one or the other or both just off focus . |
you should check all and adjust if need
Really you should be taking your time and reading the manual and follow it step by step then when you have a problem ask your first question is in the first part of basic setup
