AVS Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
1,027 Posts
Muddman,

I have a 1272 and use a DRAPER M2500 (2.5 gain) but that is mainly because I bought the DRAPER when I had a pj with less light output. I am considering going to a lower gain (1.3-1.5) screen.


I can tell you that the picture on mine is almost blinding if I ran it at the factory CONT setting of 80 (and using Iscan). The CONs that I see with the higher gain is hotspotting and a very slight lateral color shift. The PRO for the higher gain is a picture with alot of punch and the ability to run the projector at lower brightness.
 

·
Registered
Joined
·
1,847 Posts
i used a 100 inch vutec 13 gain curved screen and loved it



XANATOS
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top