AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
179 Posts
Discussion Starter · #1 ·
I am building my first htpc and have done a pretty good job so far. I have everything in the chassis, just finishing up the chassis connectors then the power for each item.


I have 3 connectors I am not sure where they go on the motherboard.


1. Power SW

2. HDD LED

3. Motherboard USB - This is a 4 pin connector which I did connect to the 2nd usb connector on the MB. Not sure if this is correct.


I connected the blue and white connector, power led in slot 11.


Thanks for your help.


Jim
 

·
Registered
Joined
·
179 Posts
Discussion Starter · #3 ·

Quote:
Originally Posted by jlenz /forum/post/16990542


I am building my first htpc and have done a pretty good job so far. I have everything in the chassis, just finishing up the chassis connectors then the power for each item.


I have 3 connectors I am not sure where they go on the motherboard.


1. Power SW

2. HDD LED

3. Motherboard USB - This is a 4 pin connector which I did connect to the 2nd usb connector on the MB. Not sure if this is correct.


I connected the blue and white connector, power led in slot 11.


Thanks for your help.


Jim

Looks like I have everything connected, so I booted up and nothing on the screen. I have a feeling it is because I am connecting the monitor via hdmi to the hd4890 card. Do i need to connect via dvi or vga to get this going?


Thanks


Jim
 
1 - 3 of 3 Posts
Top