AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
80 Posts
Discussion Starter · #1 ·
Hi Guys,


I just hooked up a Bryston 9bst to my system, and I'm getting a major hum.

I'm using a Denon 3802 as a pre/pro.

I've tried disconnecting every source from the 3802 and I've tried covering the ground on the 9bst and the hum is still there.

The hum goes away if I remove the interconnects from the Bryston (the interconnects are new Acoustic Research).

Any suggestions?


Thanks,

Aaron
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top