AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
I am having trouble modifying the Watch DVD activity on my Harmony One. The TV (PanasonicTC-P55VT60) will not switch inputs to HDMI 2. I checked the setup for this activity and the sequence seems to be correct: TV -> ON, DVD -> ON, AVR -> ON, TV -> HDMI 2, AVR -> Ext. In. All worked well with my old Sony Blu-ray player, but when I upgraded and changed the device to an Oppo Blu-ray player this activity no longer switches inputs. Viera Link has been turned off. I attempted to add a delay before the TV switched to HDMI 2, but the My Harmony application will not allow this. If I go to the device screen for the TV, the HDMI 2 button works correctly. Thanks in advance.
 

·
Registered
Joined
·
82 Posts
I have the exact same setup (working fine) and I remember adding delays to solve such problems. I also remember each device having 2 delay values to play with in the My Harmony software. I usually set them to a high value (10000 ms, so 10 s) just to make sure it solves the problem, then adjust them down as long as it keeps working.
 
1 - 2 of 2 Posts
Top