[Captain McFunk]

Hey guys, alright, i've got the Harmony One remote control. I want something to send the IR signal from the remote through the wall to my closet where all my HT equipment is. Here is a diagram of what I want to do:

I need the "sender" and "receiver" in the above picture; something that will receive the IR signal from the remote, transmit it via RF to the receiver in the closet where all my components are, then transmit from the receiver through IR to my components.


Can anyone direct me to where to buy this? I found one that goes from RF to IR, but my remote doesn't do RF.


Thanks a ton!


Captain McFunk

 

[mbfleming]

Are you aware of the newer Harmony 900 with RF?

http://www.logitech.com/index.cfm/re.../5874&cl=us,en

 

[oman321]

If you already have a Harmony One do a search for X10 Powermids on Ebay. It does exactly what you want. Just be aware that the "Receiver" powermid which will flash your equipment needs to be able to sit far enough in front to flash all your equipment or you can attach emitters depending how much equipment you have.

 

[Captain McFunk]



Quote:
Originally Posted by mbfleming /forum/post/18185801


Are you aware of the newer Harmony 900 with RF?

http://www.logitech.com/index.cfm/re.../5874&cl=us,en

Yes, but that remote is $400. I was hoping I could spend less than that.

 

[Captain McFunk]

ordered the X10 Powermids! Thanks for the information! I'll be sure to put up a picture of my setup when I get it finished! Thanks!