AVS Forum banner

701 - 720 of 13608 Posts

·
Registered
Joined
·
2,237 Posts

Quote:
Originally Posted by JohnAd /forum/post/22050019


The current version doesn't support ccmx files but you can enter a matrix for all meters by switching on the activate calibration files for all tri-stimulus probes in the advances preferences.


These issues should all be fixed shortly once I get all the issues ironed out, I'd expect a relaese early next week with the calibration matrix stuff much better.


John

We there yet?
 

·
Registered
Joined
·
6,804 Posts
Discussion Starter #702

Quote:
Originally Posted by kjgarrison /forum/post/22101195


We there yet?

I can't answer that but you can use the matrix John calculated using your x,y offsets right now. Advanced tab->XYZ coord. matrix->Manually edit
 

·
Registered
Joined
·
44 Posts

Quote:
Originally Posted by Nerd /forum/post/22092120


1)Your guess is right, my gamma is only 1.75 avg

2) Can you point me to that thread pls?

You haven't told us what display you are working on, but search the Display Calibration forum ( http://www.avsforum.com/avs-vb/forumdisplay.php?f=139 ) to find one that includes your make/model of display. If you don't find an exact match, there should still be a thread on Display Calibration that is close. Display Calibration is the forum for discussions about how-to and results of calibrations.
 

·
Registered
Joined
·
70 Posts

Quote:
Originally Posted by dml1333  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22101862



You haven't told us what display you are working on, but search the Display Calibration forum ( http://www.avsforum.com/avs-vb/forumdisplay.php?f=139 ) to find one that includes your make/model of display. If you don't find an exact match, there should still be a thread on Display Calibration that is close. Display Calibration is the forum for discussions about how-to and results of calibrations.

Projector is JVC HD-1, TV is PIONEER 427XG, thanks....
 

·
Registered
Joined
·
1,687 Posts

Quote:
Originally Posted by kjgarrison  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22101195



We there yet?
Not quite.....


We're about half way through the changes. It's probably best that I avoid giving a date at the moment but I'll give an update early next week.


John
 

·
Registered
Joined
·
718 Posts

Quote:
Originally Posted by JohnAd  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22108734


Not quite.....

We're about half way through the changes. It's probably best that I avoid giving a date at the moment but I'll give an update early next week.

John

Thanks for the update.


Will this release also address the i1pro issues?
 

·
Registered
Joined
·
1,687 Posts

Quote:
Originally Posted by djams  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22108779


Will this release also address the i1pro issues?
It should do, if not then I'll focus on that one issue until we get to the bottom of it, it's been dragging on for a while now


John
 

·
Registered
Joined
·
718 Posts

Quote:
Originally Posted by JohnAd  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22108850

Quote:
Originally Posted by djams  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22108779


Will this release also address the i1pro issues?
It should do, if not then I'll focus on that one issue until we get to the bottom of it, it's been dragging on for a while now


John

Great! Thanks again for all the good work you're doing here.


Sent from my phone using Tapatalk 2
 

·
Registered
Joined
·
6,804 Posts
Discussion Starter #709
John,


Regarding current algorithm and workflow capabilities I see these three things as high priority, can you give a quick assessment of level of complexity? I would like to help out if I can figure this git business out.



1. add dE94

2. add BT.1886 fitting function

3. add configurable non-standard color workflow - by this I mean the user specifies an arbitrary set of color targets
 

·
Registered
Joined
·
1,687 Posts

Quote:
Originally Posted by zoyd  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22117439


Regarding current algorithm and workflow capabilities I see these three things as high priority, can you give a quick assessment of level of complexity? I would like to help out if I can figure this git business out.


1. add dE94

2. add BT.1886 fitting function

3. add configurable non-standard color workflow - by this I mean the user specifies an arbitrary set of color targets
Sure

1) Low

2) Low (once the reworking of the colour code I'm half way through is finished)

3) High


1 and 2 I was going to do once I've sorted out the relevant bits of code to avoid too much repeated stuff.


3, should really needs an agreed design/approach, happy to have discussion on the mailing list, also best to offer git support there too.


John
 

·
Registered
Joined
·
14 Posts
I would just like to give a big thank you to JohnAd and all other contributors to this project.


Using HCFR together with a Spyder4 Elite,I have managed to get (I think) some reasonable results with my HX923 (929 in US), but will be asking for opinions and whether any improvements can be made. I'll do this in a separate thread , so as not to bung this thread up with beginners stuff.


I also had some help with getting everything working from DaGamePimp, so thanks to him as well.


Vince
 

·
Registered
Joined
·
1 Posts
Hi guys,


may be you are smarter then me. I can not make Spyder4Pro to use Argyll driver. If I remove Datacolor original driver and install Argyll's one, then it shows that installed not correct and shows troubleshooting triangle. When I reconnect USB cable of device - it automatically installs original Datacolor driver. And no way to connect to Argylls.


Help please


Arturas
 

·
Registered
Joined
·
1,043 Posts
I'm missing something simple. On ver 3.0.4.0 my i1d2, and i1DisplayPro work fine, I get an Argyll error when I try to use my i1Pro spectro. The argyll driver is dated 3/18/2010 which I believe to be the latest. How do I get the spectro to work with HCFR?


thanks
 

·
Registered
Joined
·
16,530 Posts

Quote:
Originally Posted by Arturas1976  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22154036


Hi guys,

may be you are smarter then me. I can not make Spyder4Pro to use Argyll driver. If I remove Datacolor original driver and install Argyll's one, then it shows that installed not correct and shows troubleshooting triangle. When I reconnect USB cable of device - it automatically installs original Datacolor driver. And no way to connect to Argylls.

Help please

Arturas

If it auto installs the datacolor driver then it has not been removed, make sure it is removed and then reboot and try again. I don't have the Spyder 4 any longer for verification but I recall there were some issues initially that we went through in this thread. I actually removed all the Datacolor software from my PC when using the Spyder 4/HCFR combo.

Quote:
Originally Posted by vega509  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22154741


I'm missing something simple. On ver 3.0.4.0 my i1d2, and i1DisplayPro work fine, I get an Argyll error when I try to use my i1Pro spectro. The argyll driver is dated 3/18/2010 which I believe to be the latest. How do I get the spectro to work with HCFR?

thanks

HCFR 3 is not working properly with the i1Pro yet, what I did was create my i1Pro profile with HCFR 2.1 and then imported that into HCFR 3 and profiled my i1D3.


Jason
 
  • Like
Reactions: vega509

·
Registered
Joined
·
487 Posts
hi guys


about to purchase an iD3, is it just plug and play with the new HCFR or do in have to install a driver?


Thanks
 

·
Registered
Joined
·
1,043 Posts

·
Registered
Joined
·
487 Posts

Quote:
Originally Posted by dml1333  /t/1393853/fork-of-hcfr-started-whats-needed/690#post_22162417


With the i1D3, you can just plug it in, no special drivers. However, you will want to run the i1D3ccss utility as mentioned here: http://sourceforge.net/p/hcfr/wiki/i1%20Display%203%20&%20colormunki%20display/ to get the display-type calibration files converted and installed.

Thanks for that - as a noob, do i have to download i1D3ccss.exe from somewhere? Where do i find it?


Thanks
 

·
Registered
Joined
·
487 Posts
Sorry but appreciate some help here!


I can purchase either the i1D pro or the color munki (believe they are both the same), can download the latest HCFR 3.0.4.0., plug it in an start taking readings and making the adjustments on my new Sam Ps51D8000 - is it really as simple as that?

Do i really need i1D3ccss.exe.?


Really appreciate some help here before I spend any serious money!
 
701 - 720 of 13608 Posts
Top