[blake18]

Hello, I turned my Epson 5040ub off, which is hooked up to the HD Fury Linker and an Xbox One X, and once I turned the projector back on, I get no image. If I bypass the Linker, I still get an image, but the Fury Linker won't work now. I have no idea what's wrong, the Linker is brand new. Any suggestions?

 

[nathan_h]

Have you tried a factory reset on the Fury? If not, try that. If still no luck, I'd recommend you post in the thread dedicated to the Linker where the manufacturer rep hangs out.

 

[HDfury]

Hello, I turned my Epson 5040ub off, which is hooked up to the HD Fury Linker and an Xbox One X, and once I turned the projector back on, I get no image. If I bypass the Linker, I still get an image, but the Fury Linker won't work now. I have no idea what's wrong, the Linker is brand new. Any suggestions?

Which FW on the Linker and which preset ?
I suggest you use the FW sent by PM and once flashed set quick preset for your PJ: HOLD RST and press INP button 3 times

 

[blake18]

Which FW on the Linker and which preset ?
I suggest you use the FW sent by PM and once flashed set quick preset for your PJ: HOLD RST and press INP button 3 times

Got it working, thanks! Still not able to get it to run in 4k/HDR/1O/12bit color at 30fps. I know the 5040ub supports this, so not sure why...

 

[HDfury]

Got it working, thanks! Still not able to get it to run in 4k/HDR/1O/12bit color at 30fps. I know the 5040ub supports this, so not sure why...

Try to post a GUI screenshot when you are trying and confirm the setup brand/model of all equipment.