[Ton666]

I have noticed that this subject has not been touched upon for quite some time.


Is there a definative answer now to what setting should be used now? some people were saying one thing, someone else another.


I have a Samsung le32a457, native is 720p and thats what i set it at. Have used some test patterns and tried different settings but the blacks under 16 always seem to be crushed, with other settings 0-16 look gray, the whites are fine. I also read about putting the tv in home theatre pc mode on HDMI 1, but i cannot find this setting on my TV. On HMDI 2 (says on the back of the tv dvi in) i can set it to optimum resolution (pc mode i think)


I have read a lot about reference levels etc and it all seems rather confusing with lots of different opinions on what the est settings are.


Any help would be much appreciated.

 

[TomGreen321]

If on HDMI set HDMi black level on the same sunsung to Low, and Reference level on the 360 to standard. On A panasonic Set the black level to Light, and the 360 to standard.. And so on.