[Justin89t]

I need two RF capable on/off switches.


1: a standard size light switch. Its controlling florescent lights so I cannot use a dimmer. Pretty simple. Physical On/Off and RF On/Off


2: I want to be able to turn my subwoofer on and off. Both remotely and physically.


I already have a normal sized switch on the wall that I'm wanting to replace with a single gang panel with two switches. I'm going to run the existing switch through one of the two, and the subwoofer wiring through the other. If I could have one of those be RF capable that would be excellent!



Anyone have any suggestions? I am using a Harmony 890 if that matters...

 

[connectedav]

You don't need RF you need Zwave..



For sub- Radio Shack


Lights- Smarthome

 

[Neurorad]

Isn't Z-wave one of the several RF protocols?


Why would you turn a sub on and off with a switch, and not with a remote control at the receiver?


I think Lutron makes a 2 switch setup, that fits in a single gang - not sure if the Lutron IR system is available with that, though. Why RF, and not IR?


I wonder if Lutron's RadioRa could do this, with a 2-button keypad...may need a controller.


Post back with what you end up with, plz.