[sleepy35758]

Really basic question guys. How would I connect this sub to this receiver . Would I just use a cable like this one ? And if I did I'm assuming I'd plug it into the subwoofer port on the receiver, but to what port would I connect the other end of the cable to on the sub? Thanks guys and sorry for the really basic question.

 

[schan1269]

You could also use a composite video cable you have laying around...


Composite video=digital coax=subwoofer cable

 

[jdsmoothie]

The sub cable would plug in to the AVR's sub preout and likely the "L" low level input jack on the sub (although read the Energy owner's manual to confirm). That cable is a bit pricey, but would work if that's what you wanted to use.

 

[sleepy35758]

So if I purchased the aforementioned cable would I just plug it into the white terminal on the back of the sub? And would that be the best connection? Attached is the back of the sub.

http://imgur.com/sqpSr.jpg%5B/IMG%5D

 

[jdsmoothie]

Yes, and yes that would be the best connection (as noted in your sub's Owner's manual).