AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
After performing the manual crt convergence from this web site, my red crt no longer moves horizontally. I switched it and the blue tube on the c-board and it moves; have I damaged the c-board, what can I do?


Thanks,

Darwin
 

·
Registered
Joined
·
4,018 Posts
Check for cracked solder connections on the C-drive.

Check the 6 big resistors on the C-drive, should be a few ohms. If all seems good, and all wires are snug, replace the STK chips. If you don't feel up to that, you can mail it to me to change the chips, or Curt, who is also in Canada.


Marc
 

·
Registered
Joined
·
18,503 Posts
Darwin, feel free to email me and let me know where you are. I've repaired lots of these..


Curt
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top