AVS Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
HI all,


My DVI connection does NOT work at all. I get a blue screen saying "No input signal". Nview does not detect projector at all!


It has been a long process of trying different drivers for my video card. Its a Nvidia Gforce4 Ti4200 and before a Gforce3 Ti500, both by Leadtek. I have tried 30.82 - 41.04 - 40.72 - 41.09 and also the drivers from Leadtek.


I tried two DVI-D cables by Belkin. One is single, the other is dual link.


I know it is not the projector fault as it has just came back from warrante, and they confirm there is nothing wrong with it.


Please help, it is getting on my wits end. And I dont want to spend anymore money on this.



Spec are:-



Epson EMP-TS10


Belkin DVI-D single/dual link cable

Leadtek Gforce4 Ti4200 with My VIVO

AlthonXP 1800

ASUS Nforce2 motherboard





Ken
 

·
Registered
Joined
·
605 Posts
Hi Ken,


Welcome to the forum.


You might want to ask the guys in the HTPC forum. They'll be pretty likely to have a few ideas for you.


Mike
 

·
Registered
Joined
·
235 Posts
Use the single link cable, and power up the pj, then the computer? At least my gf4ti4200 doesn't switch analogdvi on the fly. Install the latest nVdidia drivers too. Yeah this is a HTPC forum thread.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top