AVS Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
3,102 Posts
Discussion Starter #1
I have a problem with my setup and was wondering if anybody knows anything about this. I have a HTPC, panasonic tuhds20 HD directv sat tuner and a DLP projector. I just bought an extron SW2 VGAxi switch to handle 2 VGA signals. The signal from my computer runs fine to the projector. However, the signal from my DTv tuner has no picture. The tuner has a RGBHV connection. I have a RGBHV to VGA cable that hooks to the switch. I tried both inputs on the switch with no picture from the tuner and a clear picture from the HTPC. If I bypass the switch from the DTV tuner, then I have a picture on my projector.
 

·
Registered
Joined
·
117 Posts
Paul, have you tried switching the sync wires on your break-out cable. If your H & V are backwards, then you will have no image.


If that doesn't work, then call Extron. They will be able to help you trouble shoot your system. Their number is 800-633-9876.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top