AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have a davis dp x16 projector. I need a connectivity unit to play video

or power point. I have tried e-bay, surfed the internet for hours, trying to

find something for this unit. Does anyone know where I can get this connectivity unit or have one made?


All comments are greatly appreciated.


Thanks
 

·
Registered
Joined
·
912 Posts
Hi purplemarc - welcome to the forum :)


I'm not familiar with your PJ - what type of input jacks does it have?


Yellow - probably composite

Red, Green & Blue - component

15 pin (like a computer monitor) - VGA


Am I going in the right direction with this, or am I missing something?


More info, please?:D
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
Thanks for the reply.

The Davis projector has a connectivity hub that is specific to Davis projectors. The only way to input anything is to have this hub or have something made. I have taken it to a few computer shops to see if they can help but were no help. I even took it to a place called falcon technologies. They special make cables and such and said they couldn't help. So I've either got to have an original connectivity unit or find a computer geniuse who can rig wire this thing. That is why I can to this forum to see if anyone had some insight. The input on this is like a mini centron connector. Something very rare.


Thanks for responding.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top