[Jumpyjump]

I am looking into the above-fireplace mounts, but I don’t want the LG oled65b8pua to be too high on the wall in the “up” position due to the low and decentered vesa position on the TV. This is the only mount I’ve seen with this ability, to my knowledge, but I can’t find any of them for sale. Does anyone have suggestions? AEON 50310 https://youtu.be/ZRtu3lvSa-4 (relevant part is the 9:17 mark). Thanks!

 

[toddwz]

Not sure where you are located or about your requirements but a quick search brought up many results:

https://www.amazon.com/dp/B0767YJDLT/

https://www.mantelmount.com/?msclkid=a58c6e7a2b0c15cf2f1a33208108ee7b

https://www.monoprice.com/product?p_id=15618

 

[Jumpyjump]

Not sure where you are located or about your requirements but a quick search brought up many results:

https://www.amazon.com/dp/B0767YJDLT/

https://www.mantelmount.com/?msclkid=a58c6e7a2b0c15cf2f1a33208108ee7b

https://www.monoprice.com/product?p_id=15618

Thanks. Those are the ones I've been looking at. Some of the complaints about those are what I was asking about, since the low, non-centered position of the VESA holes on the LG OLED TV causes the TV to sit too high when mounted in the "up" position.


It needs to be adjustable where the TV sits on the mount. The one in the video is the only one that clearly shows it, but I cannot find it anywhere.

 

[toddwz]

Thanks. Those are the ones I've been looking at. Some of the complaints about those are what I was asking about, since the low, non-centered position of the VESA holes on the LG OLED TV causes the TV to sit too high when mounted in the "up" position.


It needs to be adjustable where the TV sits on the mount. The one in the video is the only one that clearly shows it, but I cannot find it anywhere.

I see. A dirty solution could be to insert a wood panel between the mount and tv. Screw the wood panel to the tv mount, and mount the tv on the wood panel. You can think this as using a wood panel to change the position of the vesa holes of your tv.