AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I currently have an 18x24 oval dish that is set up as round dish tracking the 101 sat. The 2 drops from the sat feed a 3x8 powered multiswitch. I just ordered the HDTV dish upgrade with receiver. Couple of questions:


1) I think the 3x8 ms is worthless with the 3 LNB dish. I need 4 inputs?

2) I think the installer will supply a 5x8 switch that cascades off the dish's internal multiswitch?

3) I really need more than 8 outputs. Can I add another 4x8 cascading switch using 4 outputs from the first multiswitch? Does this degrade the signal? I really don't want to buy a 12 or 16 switch because of the cost.

4) Would it be better for the installer to add a SAT C kit and repoint the dish to pick up all 3 sats?


Suggestions/advice is appreciated!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top