AVS Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
97 Posts
Try lowering the refresh and resolution first.


I have the monoprice hdmi to dual Ethernet non-powered. I had to use a powered hdmi splitter to boost the signal from the card (ati 5000 something, lowest end one). Probably about 50 feet of Ethernet.


Anyhow, I was getting the same issues until I tried a lower resolution. It then worked. The Max I can go is 1080p 24hz. I get a black screen with 60hz. So it's not bad.


I thought adding another powered hdmi booster on the other end before going into the receiver to see if I could get 60hz, but I mostly use the hdmi connection for audio than video. So I left it as it is.
 
1 - 1 of 1 Posts
Top