AVS Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
So I have a Optimus Pro sw100p subwoofer. I pulled the fuse from it to test out another project I have, and ended up blowing the fuse. I went to radio shack and got some slow blow 2-amp 250 volt fuses. Hooked the sub back up, and now whenever I plug in the low level input, all I get is a very low hum.


Will a fuse do this, or is something else the problem?
 

·
Registered
Joined
·
2,317 Posts
You sure you got the right fuse? And if so, you sure you mounted it properly in its fuse holder?
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
oh wow I didn't know fuses really had a direction that they had to go in. Turned it around and it seems to be working now. Thanks
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #4 ·
actually I think it is the wire that I got. Damn I should have known that if it's a 1.99 at radio shack then something is wrong.


it's an older sub with a y connection, and I can't for the life of me find a cord that works. I have a monster cord from before that works, but sometimes it fails and just does the low hum.


any ideas?
 
1 - 4 of 4 Posts
Top