AVS Forum banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
This may or may not be partially new info - at least part of this procedure I borrowed f/ another post.

I've read lotsa posts about the problems w/ getting the darn paper sticker off the display portion of this remote. What worked great for me, with only a little effort:

1. Hairdryer to warm label, slowly pulling off while blowing warm air on label. Paper part comes off completely leaving only glue behind.

2. Use a cotton swab to apply Goo Gone to glue, being careful to avoid touching adjacent buttons, surfaces. Use soft, clean cloth to wipe off carefully. Repeat once (more if you need).

It took me only about 5 - 7 minutes & turned out perfect.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.