AVS Forum banner
1 - 2 of 2 Posts

69 Posts
Discussion Starter · #1 ·
I have connected my PC with my new Samsung UN55ES6100 trough 10m HDMI-HDMI cable (i think it is 1.3 HDMI - text on the cable says:
AWM E101344 STYLE 20276 VW-1 80°C 30V SPACE SHUTTLE-D HDMI - http://www.ebay.com/itm/BLACK-CABLE-GOLD-CONNECTORS-E119932-UL-AWM-STYLE-20276-80-C-30V-VW-1-HDMI-CABLE-/160657063205?pt=US_Video_Cables_Adapters&hash=item2567e83d25 ).

My PC:

Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz

ATI Radeon HD 5770 Series (AMD Catalyst 12.6)

Memory (RAM) 6,00 GB

HDD: WDC WD5000AAKS-00A7B2 ATA Device (OS)

Samsung UN55ES6100:

For the last two days I'm trying to get smooth playback with Reclock and after so much time staring at TV i am now not sure if playback is good or not (maybe it is just in my had that it is out of sync). I made two clips (each is one minute long) with my phone and made a SS od Reclock settings during playing some video content. Now I'm asking you if you can check the two clips and tell me if they are sync or out of sync (is playback smooth or not)?

1) Everybody Loves Raymond - 2x22 - Six Feet Under (fs dvdrip)-Vamps

Here i set [email protected] on my GPU.

Link to a clip: http://www.sendspace.com/file/pvzuvo


Here i set [email protected] on my GPU.

Link to a clip: http://www.sendspace.com/file/ju9emr

I have also been trying to play 3D content. Note: Again i am not sure if the audio and video are in sync. When playing Half-SBS the video playback was prefect (without juddering or stuttering, 3D did work) but when i tried to play Avatar 2009 3D Blu-Ray 1080p AVC DTS-HD MA 5.1 ( http://***********/details.php?id=83873&source=search ) the picture was 3D but there was a lot of juddering or stuttering, the movie was not watchable.

I have done everything is this tutorial on how to play 3D Blu-ray movies in TMT5 ( http://www.arcsoft.com/totalmedia-theatre/tutorial/how-to-set-viewing-environment.html l) and this clip ( https://www.youtube.com/watch?v=IKJET8sgwMw ) but as i said i can't get smooth 3D Blu-ray movies playback. Is it possible that i have a problem because of:

1) My PC is 5 and half years old (bad tech spec)?

2) HDMI is presumably 1.3?

3) My GPU is ADM 5770?

4) I have all this problems because of an old HDD and i should buy SDD?

259 Posts
any update on this?

I'm having the same prob but outputting on Epson 3010 projector. 2d content plays perfect, 3d content in unwatchable spliscree (sbs) mode plays good. But when I play 3d the way its meant to be played (stereoscopic) the audio slowly gets out of sync and is unwatchable at 20 minutes in.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.