AVS Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
582 Posts
.05 to .5 ft cubed, depends on a number of variables. I would assume . 1 for a 12 and .2 for a 15.


Are you concerned about enclosure volume being affected.
 

·
Banned
Joined
·
29,681 Posts
Discussion Starter · #3 ·

Quote:
Originally Posted by Stumbo  /t/1524922/how-much-cubic-feet-does-a-12-or-15-sub-typically-consume/0_100#post_24546064


.05 to .5 ft cubed, depends on a number of variables. I would assume . 1 for a 12 and .2 for a 15.


Are you concerned about enclosure volume being affected.

Yes. But if it's that small an amount it only effects my port tune 1hz or so.. I can live with that.
 

·
Registered
Joined
·
582 Posts

Quote:
Originally Posted by Mfusick  /t/1524922/how-much-cubic-feet-does-a-12-or-15-sub-typically-consume#post_24546091


Yes. But if it's that small an amount it only effects my port tune 1hz or so.. I can live with that.

Yeah it really isn't much, that's why nobody really discusses it. If it was a concern most woofers would probably have their volume listed in their specs.
 

·
Banned
Joined
·
29,681 Posts
Discussion Starter · #5 ·

Quote:
Originally Posted by Stumbo  /t/1524922/how-much-cubic-feet-does-a-12-or-15-sub-typically-consume/0_100#post_24546124


Yeah it really isn't much, that's why nobody really discusses it. If it was a concern most woofers would probably have their volume listed in their specs.

Cool that is what I needed to know.



So .5 for two 15" is pretty reasonable assumption... and .2 for a single 12" seems reasonable right ?
 

·
Registered
Joined
·
582 Posts

Quote:
Originally Posted by Mfusick  /t/1524922/how-much-cubic-feet-does-a-12-or-15-sub-typically-consume#post_24546147


Cool that is what I needed to know.




So .5 for two 15" is pretty reasonable assumption... and .2 for a single 12" seems reasonable right ?

Yeah that would work, and even if you were off by a multiple of 2, it may change your response by a small percentage of a db
 

·
Banned
Joined
·
29,681 Posts
Discussion Starter · #8 ·

Quote:
Originally Posted by Stumbo  /t/1524922/how-much-cubic-feet-does-a-12-or-15-sub-typically-consume/0_100#post_24549354


Yeah that would work, and even if you were off by a multiple of 2, it may change your response by a small percentage of a db

If it's a small amount I can just guess at it and be ok
Thanks again for all the great replies!
 

·
Registered
Joined
·
333 Posts
1 - 9 of 9 Posts
Top