AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 4 1/2 year old 36" Wega KV-36XBR200. I recently moved and when the movers setup the TV, I notice the picture image is tilted slightly. The adjustment in the normal menu is maxed-out and it still has a slight tilt. Someone told me there is a "service mode" accessible thru a special menu. Can anyone advice me on how to access that "service menu"?


Thanks!!
 

·
Registered
Joined
·
155 Posts
Using the 2 and 5 keys on your remote to go forward or backward search for the 2150D-1 Category, then using the 1 and 4 keys in a similar manner look for item NSCO. Make sure you copy down the initial value. After you have made the change using the 3 and 6 keys on your remote to change the value up or down, press Mute followed by Enter to save the new value. Take your time to get used to the maneuvering in the Service Mode before finalizing anything.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top