AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
334 Posts
Discussion Starter · #1 ·
I see that there are both Factory & Service modes - can someone please explain the differences. I have used the Factory mode to change some settings for tweaking Gains & Bias, as outlined in Dave Bosewell HS10 FAQ.
 

·
Registered
Joined
·
3,285 Posts
Well, I have not gone into Service mode myself, but it's my understanding that gives you access to thousands of settings, many of which I wouldn't know what to do with. ;) Service mode lets you adjust the gains/biases which is enough for most of us to tweak the picture for Avia/SmartIII. In Factory mode you could really do some damage (literally!), so it's not recommended for most peeps to use.
 

·
Registered
Joined
·
837 Posts
Unless I missed something they both seem to be the same, featurewise. If so, maybe the difference is in factory mode the factory can computer calibrate via the factory port on the back of the unit.


Pure speculation on my part. I only know about pjs from what I have read or experienced. Most of the former is contradictory and the latter is limited. :)


Gary
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top