AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
i am rebuilding my HT...


i plan on using IR to control the units to be located on about a 50 ft run after going up and down vaulted ceiling and walls...


Situation: Composite video feeds directly from DVD and SA 3100 into HDTV... i also feed about three s-video inputs directly to TV...


TV is Panasonic HDTV CT-34wx50 ...most flexible set of inputs i've ever seen...


Question(s):


1. is there a way to make these long runs from amp and/or DVD maintaining composite and svideo input...without loss of quality...


2. what is the best IR unit to control approximately 10 to 12 individual units...


3. what about speaker cable runs... for Center / Fronts / Sub... i current use monster cable twisted pair...


thanks in advance

ed
 

·
Registered
Joined
·
274 Posts
Check out this thread for info on the video runs, it was very helpful to me. I ended up buying RG6-U coax from a2zcables @ $0.43/ft. I'll attach RCA connectors to them myself - I'm using those for approx 60' runs of component video and digital audio.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top