AVS Forum banner
  • Take part in a short activity and share your valuable opinion on new design concepts for AVSForum! >>> Click Here
  • Our native mobile app has a new name: Fora Communities. Learn more.

I am not getting a picture through my PDP-5020FD

789 Views 11 Replies 5 Participants Last post by  Djkid4
Hi there everyone,


I had played my xbox the night b4 and then the next morning I woke up and I can not get my TV to show a picture. The TV say it is getting a 1080i signal through the information window, but no picture.


If someone can help I would appreciate it alot.


My tivo is stating to fill up.. Yikes!!!!!!!
1 - 12 of 12 Posts
Have you tried different sources or inputs?
Try turning off the tv, unplugging it from wall for about 5 or so minutes and then plugging back it.

Quote:
Originally Posted by Juan /forum/post/16830250


Have you tried different sources or inputs?

I tried both of those things. No luck.
I actually just got something composite

cables
I finally got the HDMI to work. VERY Wierd. Any Ideads to the cause?

Quote:
Originally Posted by Djkid4 /forum/post/16830545


I finally got the HDMI to work. VERY Wierd. Any Ideads to the cause?

Superior picture quality sometimes overpowers the system.
j/k
See less See more
LOL I hope it soesn't over power it again. :)

Quote:
Originally Posted by Djkid4 /forum/post/16830672


LOL I hope it soesn't over power it again. :)

I hope so too, you might start a chain reaction of Kuro power management alerts across the globe.
See less See more
Check your xbox setting and see if its set to a specific output such as HDMI.


I had issues like this in the past with other TVs. NON Kuro. I had my regular xbox hooked up to a High Def TV and it was set to display a high def signal. Then I forgot and unplug the xbox brought it over to another TV that had component inputs but no High def. The xbox would not work, tv did not get the signal. I had to bring it back to the High def TV and change the settings from High def to standard then bring it back to the standard tv.


Maybe you had both HDMI and componets hooked up at once on your xbox or could be a setting issue in your xbox? Small possibility but worth a look

Quote:
Originally Posted by Bunga99 /forum/post/16831161


Check your xbox setting and see if its set to a specific output such as HDMI.


I had issues like this in the past with other TVs. NON Kuro. I had my regular xbox hooked up to a High Def TV and it was set to display a high def signal. Then I forgot and unplug the xbox brought it over to another TV that had component inputs but no High def. The xbox would not work, tv did not get the signal. I had to bring it back to the High def TV and change the settings from High def to standard then bring it back to the standard tv.


Maybe you had both HDMI and componets hooked up at once on your xbox or could be a setting issue in your xbox? Small possibility but worth a look




No. It was set HDMI. Nothing else would work either, Tivo, ps3,bd player.


I had handshake issues with my Sammy tv, but never had a prob. With my pioneer.
See less See more
I called pioneer and they had no clue what the prob. Was. Told me to call if it happened again.
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top