AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
171 Posts
Discussion Starter · #1 ·
I've just hung the G70 and proceeded to line up the cross patterns of the 3 tubes. The red and green are fine but the blue cross is so much higher that I could bring it down. I had no problems with the simple Sony 1272. I must be missing something obvious. Please help!


Pete
 

·
Registered
Joined
·
4,867 Posts
Pete,

It is a good idea to reset the Zone to 128 prior to starting the geometry or convergence of a G-70. But anyway if you were able to get the left right to line up in the center Blue on Green then you will probibly need to go to the Zone position 1 (which is raster shift) and adjust the blue down.


Terry
 

·
Registered
Joined
·
1,529 Posts
I had a problem with one color being above the others too ( sony 1252 ) make sure the lenses are attached and tightened fully.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top