AVS Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
576 Posts
Discussion Starter · #1 ·
-I have a new Infocus X10 and a Haromy 670.

-Everything works well EXCEPT when I hit off on the 670, the projector starts to power off (and displays a message that states "Hit any key to abort turning off"), and then the 670 must send out a signal to the projector that a key has been pressed, as the projector aborts shutting down.

-Any suggestions as how to fix this?
 

·
Registered
Joined
·
1,391 Posts
My Harmony had an option for 'double power down' when I set it up for my first pj. I'm betting your setup mistakenly thinks your pj requires two power down presses for powering down. See if you can find that on the Harmony setup website somewhere. Just my guess though.
 

·
Registered
Joined
·
576 Posts
Discussion Starter · #4 ·
I fixed it.

I went in to the troubleshoot wizard, checked that Help didn't fix the problem, and changed the power button to "toggle" from "separate button to turn on and off".

I agree with garciab that it was sending a "double off" signal, probably by default as some projectors require a harder "off" command to shut down, but the X10 seems to get the off signal the first time, and the redundant command simply abort the shutdown procedure.
 
1 - 4 of 4 Posts
Top