AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
158 Posts
Discussion Starter · #1 ·
This is just a quick note to those Panasonic 6UY owners who have ordered or are considering purchase of a DVI blade. I'm not sure if I've seen this posted before but you CAN install a 6UY DVI blade while it's still on the wall; just make sure you unplug the plasma first, before installing.


For some reason I thought the plasma would have to come down off the wall and I had to lay it on it's screen to install it but there is sufficient room to install it without taking it down. It's a pain in the neck and if you don't have a magnetic tip screw driver (I don't), the screws will fall down a lot but it can be done. Thank God for that. That 50" 6UY is %^&$ HEAVY!


Santo
 

·
Registered
Joined
·
123 Posts
Snuic, I posted that information. It might have been a bit easier for me because I blocked the wall bracket 1 1/2" from the wall. This allowed me to fit a back light behind the unit and allow ample ventilation.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top