AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Premium Member
Joined
·
113 Posts
Discussion Starter · #1 ·
Since installing the ISCO II lens for the G150CL it blocks the IR sensor almost completely. How have others solved this problem, presumalbly using the remote sensor input and installing a remote IR sensor. What companies make such a device or is this a custom built project? Radio Shack was not of any help. I have a Sony Cable Mouse cable box controller (from what equipment I have not a clue) but it has an IR sensor and cable with RCA plug. Not sure if I am brave enough to try it.


Brian H.
 

· Registered
Joined
·
450 Posts
Brian,


You can skirt the issue with an IR repeater and blaster (little IR LED that you put over the G150's IR receiver) - no electrical connection to the G150. Xantech makes this stuff. I'll eventually do the same - not a high priority for me since all I do now is manually turn mine on and off.


Peter
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top