Hello, I am in The proccess of "cutting the cord" of cable. Its way to expencive for me to pay for so many channels I don't watch. So I'm consitering using some old hardware that I have setting around to put a capture card in, and use it for ota programs, and Netflix. But I'm conserned if this hardware would be strong enough to handle win7, xbmc, and windows media center. Here are the specs;
-old dell MB
-Pentium 4 3.0 ghz ht
-Wintv-HVR-1600 Tuner (Says "On-board MPEG-2 encoder, allows your computer to run at full speed", does that mean that it will use less system resources?)
I asked this over at Tom's Hardware but apparently its dead.
Keep in mind I already have the tuner card that says "On-board MPEG-2 encoder, allows your computer to run at full speed", does that mean that it will use less system resources?
If so hopefully I can get by with the P4 for now, until I save enough for a new better machine.
That video card is next to useless. The only reason I can think of for buying that video card is if the motherboard you plan on using doesn't have integrated graphics. I don't recommend the AMD set-up, either. You can get a much better option for around the same cost as the AMD you've listed.
Vastly capable and upgradeable HTPC for only $10-15 more than your suggested AMD set-up.
The Pentium 4 3GHz should be good enough for OTA HD playback. CPU utilization would be high but as long as you keep background tasks to the minimum, it should be fine. I'd probably disable anti-virus though. Netflix HD requires considerably better hardware, though so if you want Netflix, then go with the Celeron G530 (Sandy Bridge).
Quote:
Originally Posted by ilovejedd /t/1417462/is-this-fast-enough-for-a-htpc#post_22165754
That video card is next to useless. The only reason I can think of for buying that video card is if the motherboard you plan on using doesn't have integrated graphics. I don't recommend the AMD set-up, either. You can get a much better option for around the same cost as the AMD you've listed.
I didn't even think about the vid card specs. My P4 needed a video card so I think the OP will need one but I still don't think the OP will be happy with the P4 as an HTPC.
The celeron G530 is the best suggestion and it looks to be in the OP's budget range. I'll probably be using that for a budget miniITX build for a kitchen TV at some point.
Not really. That's likely going to perform worse than the Pentium 4 you already have. Seriously, sinking any money into that build is a waste. If you're going to need to spend $50 for a video card anyway, you're better off adding another $50 to replace the MB/CPU/RAM. If budget constrained, 2GB of RAM would be enough.
1.) If you're able to use the PC without spending any money (maybe your friends are getting rid of old parts or something), then go ahead and use that PC. Stick to the P4 3.0GHz w/HT. That's likely faster than the Celeron D 2.53 GHz and P4 2.66 GHz you found.
2.) If you have to spend money (e.g. buy video card) in order to get that PC working, just ditch the MB/CPU/RAM and spend an extra $50-60 for a new platform.
Even if you get a video card for the old build, performance will be marginal and there will be plenty of tasks it won't be able to do (Netflix HD, YouTube 1080p, Hulu, 1080p H.264, etc). Heck, it might not even run xbmc smoothly. Sinking funds into that build is just money down the drain. If it at least had a PCI express x8/x16 slot, then it would be easy to recommend a GPU upgrade as you can recycle it for a future build, not to mention $20-35 PCI-e video cards are capable of decode acceleration for Blu-ray 1080p. However, $50 for a GeForce 6200 AGP? Really not worth it.
Neither of those are good enough for Netflix 720p, that's for sure. I can't think of a good reason to go with that E-350 mATX when H61 mATX + Celeron G530 will cost you less and perform much, much, much better. The Atom D2700 is slightly less expensive, sure, but you're sacrificing a lot of performance to save $10-15.
Yeah, sure, that'll work. The motherboards I had linked above was just for LGA-1155 for under $50 (priced comparably to the 760G motherboard you linked to). Really, any LGA-1155 board will work.
So my next question is what do I do about a Hard Drive? I have an IDE drive but I couldn't find any MOBO's with IDE ports.
I really don't need a big hard drive anyway because I plan on streaming everything over my local network (via my NAS) or netflix, so I think all I really need is like 8gb.
So could I use a Flash drive to install Win7 on? I can pick up a 32gb Flash drive really cheap on newegg.
I really don't want a HDD anyway, It produces noise, heat, and takes up space. (I plan on building/modding a nice custom case)
I would say XBMC Live but I don't think Netflix works on that. As for running Windows 7 from flash drive, I don't think you can. If you do, it will involve much hackery and will likely be really, really slow. Hmm, think you might be able to stretch the budget another $50 for this: http://www.newegg.com/Product/Product.aspx?Item=N82E16820226168
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
AVS Forum
34M posts
1.5M members
Since 1999
A forum community dedicated to home theater owners and enthusiasts. Come join the discussion about home audio/video, TVs, projectors, screens, receivers, speakers, projects, DIY’s, product reviews, accessories, classifieds, and more!