AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
Hi I had 2 questions. First off I know I can get a list of certified calibrators from www.imagingscience.com . But I thought I would ask here to see if any members had particular companies they would or would not recommend to use to get a set calibrated in Manhattan. My set is a 32" Sony xbr wega (KV-32XBR400).


Second off, what would be a ballpark figure to get this set calibrated? I recently had to get a part replaced on the set and since then despite multiple visits from the tech who did the replacement I am still less than thrilled with the picture, straight lines are no longer straight on the set! And I am a little leery of mucking around in the service menus myself.


Thanx for any advice.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top