AVS Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hi, i purchase use Nec Iss-6020 for my Xg-135Lc and i receive today .

I don't have manuals. I have a code 20 flashing but don't leave standy.(Only Red) someone has a idea please.


Lepsi
 

·
Registered
Joined
·
4,018 Posts
Pull the cpu card out of the back and check the dip switches. It may need to be set for stand-alone. It's one switch that needs to be set. They are usually labeled.


Marc
 

·
Registered
Joined
·
4,018 Posts
I don't remember what that means. I have had switchers like that. I reseated all the boards and flipped the internal switch to stand alone, and it usually cured it.


Marc
 

·
Registered
Joined
·
4,018 Posts
I'd try reseating the cards. I have had the "20" code, and fixed it by reseating everything. Maybe luck? Yes, E3 is the usual code. Darn manual does not mention the error codes.


Marc
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top