AVS Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,199 Posts
Discussion Starter · #1 ·
Hey guys, so i just built an HTPC. Had it in my living room while setting everything up. It was connected to a Panasonic Plasma by HDMI. Worked flawlessly. It was also running in 1080P for resolution.

Brought it downstairs to the Theater to hook up and of course, the lovely MRX doesn't seem to want to show the video. Does anyone with an MRX 300 and HTPC know how to fix this issue?

It is connect by HDMI from the HTPC to the MRX then from the MRX to the projector.

Just an FYI, when i boot up the HTPC, the booting shows up. I see Asus and i can go into the motherboard settings no problem. On the MRX it shows 1080P but also no signal but still shows the picture. Once it gets past that, the screen is black, and the MRX says 480P and no signal.

Oh and the HDMI cables were working fine with the MRX before as they were being used before. All i literally did was unplug the cable box i was using before and plugged in the computer to the HDMI. I didn't even touch the back of the MRX.

Any help or insight would be great.
 

·
Registered
Joined
·
1,370 Posts
Might get a better response if any in the HTPC section!
 

·
Registered
Joined
·
1,199 Posts
Discussion Starter · #3 ·
Yeah, i will try that. Thanks.
 
1 - 4 of 4 Posts
Top