Originally Posted by sillysally /t/1503963/jeti-specbos-software-update#post_24039680
Jeti needs a lot more than a update for LiVal, software program. They need to figure out why the 1201 can't sync with a plasma (VT60) and other makes of displays. I would guess that if you have to use the manual mode with the 1211 and a VT60/plasma you may have the same problem.
imo and the specs from tests I ran your much better off using a I1Pro 2 than a Jeti.
Originally Posted by venkatesh_m /t/1503963/jeti-specbos-software-update#post_24039701
I use a 1201 and have not had any issues with plasmas. Maybe u meant 1211?
Originally Posted by sillysally /t/1503963/jeti-specbos-software-update#post_24039853
No I meant the 1201. Try and run repeatable tests using WRGB for the 1201. I have run many tests on two Jeti 1201's (both new) and they both fail to even beat or equal my I1Pro 2.
Not only did my test show the 1201 was not able to do what Jeti says the 1201 Chromaticity reproducibility: ±0.0005 xy specs are, but this was documented by someone that had a 1201 and ran the tests.
I will post my test in a few days and start a new thread.
Originally Posted by SCProCalibrator /t/1503963/jeti-specbos-software-update#post_24395420
Are there any release notes?