AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
281 Posts
Discussion Starter · #1 ·
I just received my Panasonic 36HX41 today - the picture looks great for the most part, but I do have some questions. I don't have a service manual (yet), so keep that in mind...


1) The main problem I've noticed is that I have color splotches in all 4 corners. I do have fairly large speakers (Paradigm Studio 80s and Reference CC) pretty close to the tv, as well as electronics (Yamaha RXV2095, DVD player, DirecTIVO) on the shelf immediately below the tv. Could this be causing the problem? I would tend to say no, seeing as it's in all 4 corners (and the CC is shielded, at least). But, I could be wrong...


2) Overall, geometry isn't bad. Had the tilt out of the box, but was able to correct that with the Geomagnetic Correction adjustment. Horizontal lines seem very straight. Vertical lines, however, are rather wavy, with a definite bowing towards the middle.


3) Don't really notice a red push issue, but I just might not be able to recognize it. http://www.avsforum.com/ubb/smile.gif


4) How can I get into the service menu? Will any adjustments in there help with the above mentioned problems?


5) How does the anamorphic squeeze work? There's really no mention of it in the manual. I have my DVD player hooked up via S-Video (no composite http://www.avsforum.com/ubb/frown.gif ). How will I know if the auto-detection is working?


Any input for any of this would be greatly appreciated.


Thanks. http://www.avsforum.com/ubb/smile.gif


------------------

-Shag
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top