AVS Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
156 Posts
Discussion Starter · #1 ·
Hello all, i am trying to find the throw distance calc for this project so that i can tell my contractors where i will need them to run the cables to in order to hook up the JVC DLA-RS50U projector.


I checked out the projectorcentral.com website but they have no information on the throw distance, etc for that new projector. I was hoping someone here had knowledge of what it will be so they can help me out in where i need to place it on the ceiling.


The only information that site gives for this projector is:
Quote:
JVC DLA-RS50 Projector Specifications

(show metric units)


MSRP (USD) : $7,995

Brightness (Lumens) : 1300 ANSI

Contrast (Full On/Off) : 70000:1

Variable Iris: No

Audible Noise: 20.0 dB

Weight: 32.2 lbs

Size (inches) (HxWxD) : 7.0 x 17.9 x 18.6

Std. Lens: Focus:

Power

Zoom: Power, 2.00:1

Throw Dist (feet) : **

Image Size (inches) : **

Optional Lenses: No

Digital Zoom: **

Digital Keystone: **

Lens Shift: Horz & Vert

Warranty: 2 Years

Performance:

H-Sync Range: **

V-Sync Range: **

3D Projector: 3D Ready

3D Glasses Type: Shutter

Compatibility:

HDTV: 720p, 1080i, 1080p/60

EDTV/480p: Yes

SDTV/480i: Yes

Component Video: Yes

Video: Yes

Digital Input: HDMI

Computers: Yes

Display: Type:

0.7" D-ILA (3)

Native: 1920x1080 Pixels

Maximum: **

Aspect Ratio: 16:9 (HD)

Light Source: Type:

220W UHP

Life: **

Quantity: 1

Speakers: No

Max Power: **

Voltage: 100V - 240V

FCC Class: **

Special: 3D Projection

RS232 Port

2:3 Pulldown

THX Certified

Wired Networking

Status: Announced

First Ship: Pending

** this item is either not applicable, unpublished, or unknown

The JVC DLA-RS50 is manufactured by JVC.

My projector screen is wall H125: 16:9 ratio, 125" wide image XBT: Center Stage XD, black backing, tab tensioned 08: 8" drop. And the room width is around 30 feet.


Any help would be great so i don't tell them to put an outlet somewhere that the projector will not be in the area to use.


Thanks!



David
 

·
Registered
Joined
·
953 Posts

Quote:
Originally Posted by StealthRT /forum/post/19504600


So i should be safe if i put the project around 15-20feet away from the screen to project the 125" image, correct?


David

15 would be about as close as you can go with a 125" WIDE screen. (If you meant 125" diagonal then you would be in good shape.)
 

·
Registered
Joined
·
156 Posts
Discussion Starter · #6 ·

Quote:
Originally Posted by jmonier /forum/post/19505220


15 would be about as close as you can go with a 125" WIDE screen. (If you meant 125" diagonal then you would be in good shape.)

Ok, i will set it back to 18 just to be safe
thanks


David
 
1 - 6 of 6 Posts
Top