AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
190 Posts
With the TV off, press on the remote Display, 5, Volume up, then Power.


Unfortunately, all that you can do in service mode is change the gain and offset values of the 709 (for HD), 609 (for SD), and VGA color spaces. On top of that, all of the values are in Y Cr Cb instead of RGB. Remember to write down all of the settings before you start messing with them!
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #3 ·
Thanks for the info and the advise!

Quote:
Originally Posted by louie826 /forum/post/15591385


With the TV off, press on the remote Display, 5, Volume up, then Power.


Unfortunately, all that you can do in service mode is change the gain and offset values of the 709 (for HD), 609 (for SD), and VGA color spaces. On top of that, all of the values are in Y Cr Cb instead of RGB. Remember to write down all of the settings before you start messing with them!
 
1 - 3 of 3 Posts
Top