AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Hey guys,


I have a weird problem. My Kenwood KRCX858 decided to freak out on me. The faceplate that hides when the car is off is now remaining in the open "Cassette Tape insertion" mode. When I press the reset button, the faceplate goes into the ON position but there is no power in the display. I cant press any buttons. I took the stereo out and checked the fuse and wiring but everything looks good. What can be the problem? I cant take off the faceplate either. The lock switch seems like it is stuck or something. Help!
 

·
Registered
Joined
·
70 Posts

Quote:
Originally Posted by eug718pioneer /forum/post/0


Hey guys,


I have a weird problem. My Kenwood KRCX858 decided to freak out on me. The faceplate that hides when the car is off is now remaining in the open "Cassette Tape insertion" mode. When I press the reset button, the faceplate goes into the ON position but there is no power in the display. I cant press any buttons. I took the stereo out and checked the fuse and wiring but everything looks good. What can be the problem? I cant take off the faceplate either. The lock switch seems like it is stuck or something. Help!

Usually the ribbon cable was the cause of the MASK headunit failures reguarding the faceplate. It can be fixed, however it might be cost effective to replace it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top