AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter · #1 · (Edited)
I have to decide on my in wall lcr placement today. My screen is in the mail 120" acoustic silverticket 16:9.

My problem is the screen edge overlaps a portion of the in wall speaker Instead of completely covering or missing them. This assumes a 25 degree angle to center seat.

The tape and metal bar are screen edge with the tape/tracer in the inside screen position. The outside position would be within 2ft of the corner.

I can move the left/Right inwards to be behind the screen and reduce the angle to 19 degrees but conceal the speakers or I can move them closer to the side wall with an of 24 degrees and be full visible. I care less about concealment and more about sound field.

Any guidance would be appreciated.

Picture attached for reference.
 

Attachments

·
Registered
Joined
·
1,666 Posts
Since you're going with in walls, I'm guessing that a pair of Klipschorns in the corners are out of the question?

I'm not a fan of in-wall. Too many compromises as you are starting to find out.

Is your screen an acoustically transparent screen? If so, perhaps it won't matter??
 
1 - 2 of 2 Posts
Top