AVS Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I can't stress how important it is to get the EDID settings right with the EDID dip switches. Symptoms of the problem was unstable TV picture, sometimes picture with no audio or sometimes no sound or picture. If your HDMI Extender to TV connection suffers any of these issues and you are sure your cabling is in a good condition, chances are the EDID dip switches on the Lenkeng unit needs to be set correctly so that the correct resolution and sound info is sent to TV set via HDMI Extender Splitter. Lenkeng settings for the EDID dip switches can be found at the underside of the sender unit.
 
1 - 1 of 1 Posts
Top