AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
hi team


my set up:


win xp pro 2600 (without any updates)

ati radeon 32 mb ddr - driver, 6.13.10.6071

maudio delta dio - driver, delta wdm 5.10.0.27

windvd 4.0 plus

powerdvd 4.0 xp

regionkiller 2.5.0.1

powerstrip 3.15

1280 x 720 @ 71.904

barco cine 7 limo


i played around with the settings and this is what i discovered so far.


start -> settings -> control panel -> sound audio devices -> audio tab -> sound playback default device "m audio delta dio spdif"


windvd audio set up - spdif

windvd video set up - use hardware decode accel. off


a. windvd launch with mute 'on'

b. no dolby digital, no dts - only 2 s[peakers


with windvd video set up - use hardware decode accel. on


spdif is available, dts and dolby digital track plays normally but with slight lip sync problem. picture appears to be slightly ahead of audio.


but when i changed this setting during playback...


start -> settings -> control panel -> sound audio devices -> audio tab -> sound playback default device "m audio delta dio multi channel"


lip sync is immediately solved and doby digital and dts track plays beautifully too.


the setting has to be changed during playback or windvd will popup error message about not supporting dts track.


hope this helps... good luck
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top