AVS Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
I have a well build 6.3 cu ft for the original Shiva-X with dual 4 ports tuned to 22hz. What is the good 12 sub driver for this box that cost under $200? The Shiva-X was discontinued so it maybe tough to find one.

Thanks,
 

·
Registered
Joined
·
183 Posts

Quote:
Originally Posted by danny1974 /forum/post/18249047


I have a well build 6.3 cu ft for the original Shiva-X with dual 4” ports tuned to 22hz. What is the good 12” sub driver for this box that cost under $200? The Shiva-X was discontinued so it maybe tough to find one.

Thanks,

Don't know if it models well in that box, but the Epic is on sale now at PE:

http://www.parts-express.com/pe/show...number=293-608


Hell of a driver either way.....with free shipping, even a better deal.
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #5 ·

Quote:
Originally Posted by Uklit /forum/post/18251278


Why not the Shiva-X II?
Quote:
Originally Posted by zhillsguy /forum/post/18252558


Don't know if it models well in that box, but the Epic is on sale now at PE:

http://www.parts-express.com/pe/show...number=293-608


Hell of a driver either way.....with free shipping, even a better deal.

The spec did not look correct. The VAS is too small. With 1.62 cu ft VAS, the SPL is only 82 db, not 86 db as listed. On other hand, the new Epic have similar spec but 3.22 cu ft VAS.
http://www.parts-express.com/pe/show...number=293-650
 

·
Registered
Joined
·
183 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #7 ·

Quote:
Originally Posted by zhillsguy /forum/post/18256909


From the Audiopulse website it is 97L, or 3.43 cu.ft., it does appear incorrect:
http://www.audiopulse.com/products/s...-drivers/epic/

With the spec from audiopulse, the box still a tad bigger than recommended. I can tune it a little lower to smooth out the response. I need to check the port lenght again.

Anyone have personal experience with this Epic driver?
 
1 - 7 of 7 Posts
Top