AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter · #1 ·
After setting up the LP350 with an RCA DTC-100 STB, I had some very strange issues. 1080i would display beautifully, but the unit would never sync to the upconverted 540p very well. After perfecting the image was displayed, I had strange rolling bars on any of the non HD channels. Tried auto image, manual sync, etc. but could never combine sync with 1080i and 540p. Seems like the DTC-100 should be compatible with this projector since so many here use this combo, any tips or pointers for setup? Thanks,

Steve
 

·
Registered
Joined
·
4,654 Posts
Sometimes I could get it to sync first time, and sometimes it would drive me crazy. The trick was to make sure the DTC-100 was on and set to the right channel and outputting HD before you even turn the projector on. I can't be of much help otherwise, because every time I tried to adjust something, it got worse, so I stayed with the 350's defaults.


------------------

Joe

My current idea of the best value:

Boxlight 38t

Quadscan Elite

Panasonic RP91

RCA DTC-100

Da-Lite 100" 4:3 1.3gain

Studio Experience SE616's

and some other stuff.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top