AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter · #1 ·
I should have my LT150 tomorrow and I have a few questions regarding setup.


John Andrews over at abigpicture was kind enough to configure the projector and my DVDO IScan pro before shipping so that I will have full aspect ratio control. He was also fantastic to purchase from in every other way... I can't recommend his business enough.


I'm just curious what other tips and tricks you guys may have for setting up the picture. I'll be projecting onto a 72" Dalite 1.5 gain screen. Actually I'll be projecting onto curtain lining until I get that screen, but only for a few days. http://www.avsforum.com/ubb/smile.gif


So anything special I should know or is configuring with Video Essentials enough? Thanks.
 

·
Registered
Joined
·
873 Posts
If you do a search on 'For your eyes only' there's lots of info. Search on LT150 and you'll never stop reading - there are tons of posts.


As Grant always says, be sure and turn the white segment off. I also seem to recall his saying that after lots of fiddling with settings, he finally settled on the factory defaults as being the best.


Kelly
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top