AVS Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
158 Posts
Discussion Starter · #1 ·
I have a lt150z and it has a setting to move the cinema mode to the top of the screen (very handy for masking with a pulldown) Can someone tell my if the lt150 has this feature also?

A friend of mine is wanting one and likes this feature of the Z



Bill
 

·
Registered
Joined
·
5,132 Posts
I have LT150 and using 'vertical position' in VGA mode you can move the image to top or bottom of screen. You can also do this with Zoomplayer, YxY, Theatertek and HTPC. Moving image in Svideo or component is not as clean as it tends to cut off part of the picture and introduce artifacts.
 

·
Registered
Joined
·
270 Posts
I'm using the progressive component outputs from my Panasonic RP56 hooked up to the vga input of the LT150 via BNC breakout cable. Can I move the cinema mode to the top via this method without introducing artifacts?
 

·
Registered
Joined
·
5,132 Posts
Maybe a little but not a lot as it'll cut off the picture's top and introduce green lines at the bottom. Try it for yourself. It won't hurt anything. Just move it back if artifacts arise.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top